Saturday, 15 December 2001

Room 1

10:40-12:20

A4-1: Design for X (2)

1. The Conflict of Contradictory Environmental Targets

Conrad Luttropp, Reine Karlsson, KTH, Sweden

2. Life Design for Remanufacturing Durable Products

Susumu Okumura 1 , Toshimitsu Morikuni 2 , Norio Okino 1 , 1 Univ. of Shiga Prefecture, Japan, 2 NEC Machinery, Japan

3. Development of Recovery Indicators to Be Used during Product Design Process: Method, Potentialities and Limits

Fabrice Mathieux 1 , Daniel Froelich 1 , Pierre Moszkowicz 2 , 1 ENSAM Chambery, France, 2 INSA Lyon, France

4. Treatment of Reliability for Reuse and Remanufacture

Takeshi Murayama 1 , Lily H. Shu 2 , 1 Hiroshima Univ., Japan, 2 Univ. of Toronto, Canada

5. EcoDesign for Product Variety: A Multi-Objective Optimization Framework

Suiran Yu, Satoru Kato, Fumihiko Kimura, The Univ. of Tokyo, Japan

13:20-15:20

A4-2: Tools for DfX

1. Life-cycle Design System for Machined Parts -- Linkage of LCI Data to CAD/CAM Data

Shoji Nawata, Tojiro Aoyama, Keio Univ., Japan

2. Development of Recyclability Evaluation Tool

Naohiko Oyasato, Hideki Kobayashi, Kazuhito Haruki, Toshiba, Japan

3. Recycling Oriented Design -- A Case Study on House Appliances Using the Software ATROiD

Hong-Yoon Kang 1 , Jang-Woo Jung 1 , Christoph Herrmann 2 , 1 LG Production Engineering Research Center , Korea, 2 IWF, Technical Univ. Braunschweig , Germany

Room 1

4. Recyclability Evaluation Method (REM) and Its Applications

Yuzo Hiroshige, Takayuki Nishi, Toshijiro Ohashi, Hitachi, Japan

5. Approximate Life Cycle Assessment of Classified Products Using Artificial Neural Network and Statistical Analysis in Conceptual Product Design

Ji-Hyung Park 1 , Kwang-Kyu Seo 1 , David R. Wallace 2 , 1 Korea Inst. of Science and Technology, Korea, 2 MIT, USA

6. DfE Tools -- A Way for Application of LCA in Product Design?

Michael Betz, Harald Florin, Kaufm. H. Schöch , PE Product Engineering, Germany

Room 2

11:20-12:40

A4-3: LCA Case Studies

1. Life Cycle Assessment of Third Generation (3G) Wireless
Telecommunication Systems at Ericsson

Jens Malmodin, Lisa Oliv, Pernilla Bergmark, Ericsson Radio Systems , Sweden

2. Generic LCA Based DfE -- A Case Study of Different PWB Systems

Constantin Herrmann 1 , Michael Betz 2 , Niels Warburg 1 , 1 Univ. of Stuttgart,
2 PE Product Engineering, Germany

3. Ecological Improvement of the Vending Machine Using LCA Method

Yukio Kimura 1 , Seizo Kato 2 , Naoki Maruyama 2 , Yucho Sadamichi 2 , Anugerah Widiyanto 2 , Yoshitaka Joukaku 2 , 1 Fuji Electric, 2 Mie Univ., Japan

4. LCA of Machine Tools with Regard to Their Secondary Effects on Quality of Machined Parts

Javad Akbari, Keigo Oyamada, Yoshio Saito, Tokyo Inst. of Technology, Japan

13:40-15:20

A4-4: Design for Disassembly

1. Product's Disassemblability Evaluation Using Information Entropy

Hideo Fujimoto, Alauddin Ahmed, Kazuaki Sugi, Nagoya Inst. of Technology, Japan

2. Design of Heat-Activated Reversible Integral Attachments for
Product-Embedded Disassembly

Ying Li, Kazuhiro Saitou, Noboru Kikuchi, Steven J. Skerlos,
Panos Y. Papalambros, The Univ. of Michigan, USA

3. A Design for Recycling Technique for Optimizing Resource Circulation Characteristics of Products

Yasuo Kondo, Ko-suke Hirai, Fumio Obata, Tottori Univ., Japan

4. Development of Disassembly Support System for Mechanical Parts and Its Application to Design Considering Reuse/Recycle

Hidefumi Wakamatsu, Akira Tsumaya, Keiichi Shirase, Eiji Arai, Osaka Univ., Japan

Room 2

5. Design for Re-Use and Disassembly

Martina Hoffmann, Bernd Kopacek, Reinhard Knoth , Austrian Society for Systems Engineering and Automation, Austria

Room 3

10:00-11:00

E4-1: Social System Design (1)

1. Analyzing Sustainability of Circulatory System by Using
the Rewriting System

Kotaro Kakimoto , Takayuki Shiose , Toshiharu Taura , Kobe Univ. , Japan

2. Indirect Control Methods for Navigating the Agent-Based Recycle Society

Takayuki Shiose, Kouji Yokoyama, Toshiharu Taura, Kobe Univ., Japan

3. From a Factory to a Person: One Approach for Sustainable and
Service-Oriented Manufacturing Scheme

Masahiko Onosato 1 , Nydia Suppen 1 , Koji Teramoto 1 , Kazuaki Iwata 2 , 1 Osaka Univ., 2 International Inst. of Advanced Studies, Japan

11:20-12:40

E4-2: Social System Design (2)

1. Integrated Product Policy (IPP) and Eco-Product Development (EPD)
(Keynote)

Martin Charter, The Centre for Sustainable Design, The Surrey Inst. of Art and Design, Univ. Coll. ,UK

2. Design and Evaluation of the Recycle of Home Appliances: An Application of Market Microstructure Theory

Kanji Ueda 1 , Nariaki Nishino 1 , Atsushi Iwasaki 1 , Sobei H. Oda 2 , Itsuo Hatono 1 , 1 Kobe Univ., 2 Kyoto Sangyo Univ., Japan

3. Demonstration of a Nature Symbiotic Office Designed for 100 Years Use

Masanobu Nagano, Kochi Eco-Design Council , Japan

Room 3

13:40-15:20

B4-1: Cleaner Processes and Energy-Saving Processes

1. Development of Drying Technology Utilizing Solar Energy to
Dry Agricultural and Marine Products

Hidetoshi Aoki , Hachinohe Inst. of Technology, Japan

2. On Process Planning with Multiple Agents: Environmentally Conscious Decisions among Feasible Process Plans

Beth E. Allen, Univ. of Minnesota, USA

3. 100% Ozone-Treatment System for Bath and Swimming Pool Water --
CERAZONE

Reiji Terao 1 , Kazunori Mori 1 , Masaki Matsui 2 , 1 TERAO, 2 Gifu Univ., Japan

4. Energy Saving Cleaner Technology for Conversion of Waste Pickle Liquor and Mill Scale

Natteri M. Parthasarathy , SALN Coll. of Engineering & Management/ETK International Ferrites Ltd. , India

5. Development of Hybrid Micro Machine Tool

Tsuneo Kurita 1 , Shinya Watanabe 2 , Mitsuro Hattori 1 , 1 National Institute of Advanced Industrial Science and Technology (AIST) , 2 Disco Co. , Japan

Room 4

9:40-10:40

E4-3: Labelling and Logistics

1. Trial of Product Environmental Information System -- Canon Case (Type III Eco-Label, JEMAI Program Ver.2)

Kiyofumi Matsumoto, Norihiro Mochizuki, Keizo Naganuma, Masaaki Oono, Canon, Japan

2. Re-Use of End-of-Life Electronic Equipment and Components --
Logistic Aspects

Reinhard Knoth, Martina Hoffmann, Bernd Kopacek, Peter Kopacek, Austrian Society for Systems Engineering and Automation, Austria

3. Inverse Distribution System of Construction for Closed-Loop
Construction System

Hiroyuki Nakamura 1 , Jun Shiino 2 , 1 Shimizu, 2 Waseda Univ., Japan

11:00-12:40

Special Theme 9-4-1: Advanced Technology for Electronic Packaging:
JIEP Session (1)

1. JIEP EcoDesign for Tomorrow (Keynote)

Hidetaka Hayashi, Fujikura, Japan

2. Conductive Adhesive for Plated Sn Electrode

Michinori Komagata , Yukio Shirai , Noritsuka Mizumura , Kenichi Suzuki , NAMICS , Japan

3. Development of Environmentally Friendly Epoxy-Resin Compounds without Toxic Flame Retardants and Their Application to Electronic Parts

Yukihiro Kiuchi, Masatoshi Iji, NEC, Japan

4. Trend of Halogen Free Printed Wiring Board Materials

Tetsuaki Suzuki, Toshiba Chemical, Japan

Room 4

13:40-15:20

Special Theme 9-4-2: Advanced Technology for Electronic Packaging: JIEP Session (2)

1. Development of Formaldehyde Free Electroless Copper Plating Solution

Takeyuki Itabashi 1 , Haruo Akahoshi 1 , Tadashi Iida 1 , Eiji Takai 2 , Naoki Nishimura 2 , 1 Hitachi Printed Wiring Board Solutions Co. , 2 Hitachi , Japan

2. Low Distortion Cold Rolled Clad Sheets for Mounting Material

Shinji Ozawa, Kazuo Yosida, Hiroaki Okamoto, Kinji Saijo, Toyo Kohan, Japan

3. High Sensitivity Dry Film Photoresist for Laser Direct Imaging System

Teruhiro Uematsu, Tokyo Ohka Kogyo, Japan

4. New Halogen-Free High Elastic Moduls Build-Up Material

Nobuyuki Ogawa, Hitachi Chemical, Japan

5. Ball Semiconductor Process and Material

Masataka Yoshida, Masataka Yoshida Ball Semiconductor, Japan

Room 5

9:20-11:00

Special Theme 8-4-1: EcoDesign and Chemical Engineering (1)

1. Eco-Design of Water Purification Equipment for Domestic Use

Kensaku Mizoguchi 1 , Hideya Kamikawa 2 , 1 Shizuoka Univ., 2 Yamaha Motor, Japan

2. Filtration Behaviors in Microfiltration with Periodic Backwashing of Secondary Municipal Wastewater

Than Ohn 1 , Mohammad S. Jami 2 , Yasuhito Mukai 2 , Eiji Iritani 2 , 1 Aichi Science and Technology Foundation , 2 Nagoya Univ. , Japan

3. Life Cycle Inventory Analysis of Waste Oil in Japan

Chie Nakaniwa 1 , Yoshie Yagita 2 , Atsushi Inaba 3 , 1 Yale Univ., USA, 2 Ochanomizu Univ., 3 National Inst. of Advanced Industrial Science and Technology, Japan

4. Development of a Life Cycle Inventory Database for Chemical Products

Kiyotaka Tahara, Atsushi Inaba, National Inst. of Advanced Industrial Science and Technology, Japan

5. A Method to Evaluate Regional Material Flow for
Designing Recycling Society

Koichi Fujie 1 , Naohiro Goto 1 , Tomotaka Usui 2 , 1 Toyohashi Univ. of Technology, 2 Aichi Science and Technology Foundation, Japan

11:20-12:40

Special Theme 8-4-2: EcoDesign and Chemical Engineering (2)

1. Decomposition Mechanism of Epoxy Resin in Nitric Acid for Recycling

Weirong Dang 1 , Masatoshi Kubouchi 1 , Shurou Yamamoto 1 , Hideki Sembokuya 1 , Kazuyoshi Arai 2 , Ken Tsuda 1 , 1 Tokyo Inst. of Technology, 2 Hosei Univ. , Japan

2. Plastic Recycling with Supercritical Fluids

Izumi Okajima, Takeshi Sako, Shizuoka Univ., Japan

3. For Building Eco-Industrial Society Originating in Chubu (Central Japan) (Keynote)

Yoshihiro Yasui , Environmental Partnership Organizing Club (EPOC) , Japan

Room 5

13:20-15:20

Special Theme 8-4-3: EcoDesign and Chemical Engineering (3)

1. A New Program for Integrated Recycle System of Chemical Products

Kensaku Mizoguchi 1 , Youji Akiya 2 , Toshiaki Ito 3 , Junjiro Kawasaki 4 , Yoshiyuki Hashiguchi 5 , Yasushi Hirata 6 , Minoru Nomura 7 , Kiyomi Imou 5 , Akira Kanai 7 , Masahito Sato 2 , Shigeru Matsumoto 8 , Ken Kataoka 9 , 1 Shizuoka Univ., 2 AIST, 3 Mitsubishi Heavy Ind., 4 Tokyo Inst. of Technology, 5 KANEKA, 6 Bridgestone, 7 JCII, 8 Tohoku Univ., 9 Daceil Chem. Ind. , Japan

2. Technological Information Infrastracture for Design and Operation of Recycling Systems

Yuji Naka 1 , Atsushi Aoyama 1 , Rafael Batres 1 , Akio Shimizu 1 , Kazuhisa Hamada 2 , Katsuyoshi Kameda 2 , Takashi Kagiyama 2 , Iwao Matsumoto 2 , Masahiko Hirao 3 , Hirokazu Hayashi 4 , Atsushi Inaba 5 , 1 Tokyo Inst. of Technology, 2 Japan Chemical Innovation Inst., 3 The Univ. of Tokyo, 4 The Society of Chemical Engineering of Japan, 5 National Institute of Advanced Industrial Science and Technology , Japan

3. Gasification of Organic Waste Materials (OWM) for Power Generation
Using Fuel Cell

Michihiko Hamai 1 , Motohiro Kondo 1 , Masataka Yamaguchi 1 , Guilin Piao 2 ,
Yoshinori Itaya 3 , Shigekatsu Mori 3 , 1 Toyota Motor, 2 Aichi Science & Technology Foundation, 3 Nagoya Univ. , Japan

4. Double Coated Adhesive Tape for Recycle Application

Koichi Ikeda, Kazuhiko Shibata, Nitto Denko, Japan

5. Considerations of Process Flexibility in Design of Chemical Processes for Satisfaction of Economic and Environmental Objectives (Keynote)

Jim Petrie 1, 2 , Brett Alexander 2 , 1 Univ. of Sydney , Australia , 2 Univ. of Cape Town , South Africa

Room 6

10:20-11:40

Special Theme 2-4-1: Promotion of DFE (1)

1. Creating Business Value by Linking Industrial Ecology with Business Strategy and Product Design (Keynote)

Patrick Eagan, Mark Finster, Dennis Hussey, Univ. of Wisconsin-Madison, USA

2. An Outline of Activities by the Committee of Design for Environment (DfE), Japan, 1994-2001

Shinzo Omi 1 , Mamoru Morimoto 2 , Shigeru Suda 2 , 1 Tokyo Univ. of Agriculture and Technology, 2 Japan Environmental Management Association for Industry, Japan

3. Quality Function Deployment for Environment: QFDE (1st Report) --
A Methodology in Early Stage of DfE

Keijiro Masui 1 , Tomohiko Sakao 2 , Atsushi Inaba 1 , 1 National Inst. of Advanced Industrial Science and Technology, 2 Mitsubishi Research Inst., Japan

12:00-12:40

Special Theme 2-4-2: Promotion of DFE (2)

1. Quality Function Deployment for Environment: QFDE (2nd Report) --
Verifying the Applicability by Two Case Studies

Tomohiko Sakao 1 , Keijiro Masui 2 , Mitsuru Kobayashi 3 , Seiichi Aizawa 4 , Atsushi Inaba 2 , 1 Mitsubishi Research Inst., 2 National Inst. of Advanced Industrial Science and Technology, 3 Shinko Electric, 4 IIYAMA Corp., Japan

2. Environmental Effect Analysis -- How Does the Method Stand in Relation to Lessons Learned from the Use of Other Design for Environment Methods

Mattias Lindahl, Univ. of Kalmar, Sweden

Room 6

14:00-15:20

Special Theme 5-4: Recycling of Individual Products
(Current and Future)

1. Towards Inverse Production Life Cycle Design: A Simulation Tool Linking Mass Products Recycling to Environmental Legislation and Market

Francesco Jovane 1 , Roberto Bosani 1 , Lorenzo Castelli 2 , Fabio Salsa 1 , 1 Italian National Research Council, 2 Univ. of Trieste , Italy

2. The QWERTY Concept, A Powerful Concept for Evaluating
the Environmental Consequences of End-of-Life Processing of Consumer Electronic Products

Jaco Huisman 1 , Toon Anscms 2 , Lourens Feenstra 2 , Ab Stevels 3 , 1 Delft Univ. of Technology, 2 TNO Environment, Energy and Process Innovation, 3 Royal Philip Consumer Electronics ,
The Netherlands

3. Some Obervations on Recycling of Electrical Home Appliances Activities in Taiwan

Jahau L. Chen, National Cheng Kung Univ., Taiwan

4. Waste Utilization by Melting and Crystallization Technology

Takumi Kaneko, Jun Mochizuki, Hisashi Endo, Tsukishima Kikai, Japan

International Conference Room, 7F

15:40-16:30 Plenary III