Program
Plenary Talk and Lecture
Dec.11(Mon) Room A,B
9:10-9:30 Opening
Dr.Yuji Furukawa(Union of Ecodesigner)
9:30-9:50 Plenary Talk 1
(Ministry of Environment)
9:50-10:10 Plenary Talk 2
(Ministry of Economy, Trade and Industry)
10:00-10:50 Plenary Lecture1 Technical trend of env. and energy for automotives
Prof.Yasuhiro Daisyo(Waseda Univ)
10:50-11:30 Plenary Lecture2 Ecodesign movement in the Korean industries
Prof.Kun-Mo Lee (Ajou University(Korea))
11:30-12:10 Plenary Lecture3 On the Japanfs Official Development Assistance (ODA)
Prof. Toshio Watanabe(Takushoku Univ) |
Dec.12(Tue) Room A,B
15:20-16:00 Plenary Lecture4 Readiness in Industry for Circular Economy in China
Prof. Wang Chengtao (Shanghai Jiao Tong Univ.(China))
16:00-16:40 Plenary Lecture5 EcoDesign towards sustainable industrial innovation
Prof.Naomasa Nakajima(AIST Japan)
16:40-17:00 Closing
Prof. Shinya Nagasawa(Executive Committee Chair) |
Oral Sessions
Dec.11(Mon) Room A
13:00-14:20 (MD-1-4) Material design
[MD-1] Effect of various surface treatments on ultra long life fatigue characteristics of aluminum alloys in rotating bending
Tatsuo SAKAI (Ritsumeikan University)
[MD-2] Giga-cycle rotating bending fatigue properties of SNCM439 steel tempered at low temperatures
Tatsuo SAKAI (Ritsumeikan University)
[MD-3] Effect of tempering temperature on Giga-cycle fatigue characteristics of SCM435 steel in rotating bending
Tatsuo SAKAI (Ritsumeikan University)
[MD-4] The self-regenerative intelligent catalyst for super-ultra-low-emission vehicle (SULEV)
Hirohisa Tanaka(Daihatsu Motor Co., Ltd.)
14:20-15:20 (AM-1-4) Altanative Material
[AM-2] Erosion protective design for lead-free wave soldering bath
Tadashi Takemoto (Osaka University)
[AM-3] Estimation of the micromechanical characteristics of Sn-3.5Ag-0.1Co lead-free solder
Feng Gao(Osaka University)
[AM-4] Influential factors in determining the thermal conductivity of isotropic conductive adhesives
Masahiro Inoue (Osaka University)
16:40-18:20 (ET-1-8) Ecodesign tool and decision making
[ET-1] Design for Disassembly (DfD): A customer oriented approach in sustainable design (SD)
Ali Vakili-Ardebili (The University of Liverpool,)
[ET-2] Product LCA evaluation considering the variation in products
Jahau Lewis Chen (National Cheng Kung University)
[ET-3] Integrating Eco-Design into the university curriculum
Xiaoying Zhou (University of California)
[ET-4] Eco-MCPS, a newly developed Web-based database for eco-materials, eco-products, eco-components, and eco-services
Riko Ozao (SONY Institute of Higher Education)
[ET-6] A proposed decision support system to design Eco-product at conceptual phase
Akajate Apikajornsin (King Mongkut's Institute of Technology) |
Dec.12(Tue) Room A
8:50-10:10 (CV-1-4) Consumer Value vs Environment
[CV-1] Alternative models of sustainable consumption-morphing products and interiors"
Tim Antoniuk (University of Alberta)
[CV-2] Investigation on value increase in inverse distribution process
Hidetaka HAYASHI (Ecodesign Promotion Network)
[CV-3] Demand forecasting for green vehicles in Taiwan using conjoint analysis
Li-Hsing ShihNational (Cheng Kung University)
[CV-4] Value-Based strategies & setting priorities with Ecovalue
Oriol Pascual (Delft University)
10:10-11:30 (RS-1-4) Recycling and Society
[RS-1] Production of environmental friendly and quality guaranteed recycled engineering polymer products
Yasuo Shimoyamada (Intertech Limited)
[RS-2] Multi-utilization of biomass as energy source and functional materials
Riko Ozao (SONY Institute of Highere Education)
[RS-3] Living on the edge: from homelessness to recycling
Maria Cecilia Loschiavo dos Santos (University of Sao Paulo)
[RS-4] Target order quantity considering environment and economy by interactive method
Eri Domoto (Osaka University)
12:20-15:00 (GM-1-8) Green Manufacturing
[GM-1] Research into functional evaluation of non-slippery and ecological floor material for buses
Toshiki Nishiyama (Keio University)
[GM-2] A Study on the manufacturing of brake tube and flare nut for automobiles
Kyu-Taek Han (Pukyong National University)
[GM-3] The management outline and the current reduction status of the ozone depleting substances in Taiwan
Lo Huei WeiIndustrial (Technology Research Institute)
[GM-4] Ideality and trends of evolution in minimal manufacturing and Eco-business
Jahau Lewis Chen (National Cheng Kung University)
[GM-5] Water quality monitoring system by measuring turbidity and composition of impurity part
Fumitake KATO (Ibaraki National College)
[GM-6] A new flame-retardant for PC resin using waste plastic as a raw material
Inagaki Yasuhito (sony)
[GM-7] Creative environmental safety and R & D for Cu-PTH PWBs
- As a methodology 40 years before and now.-
Hideaki Kobuna (Nippon Avionics Co., Ltd.)
[GM-8] A strategic study of chemical industry to response REACH in Non-oil-producing Area
-in case of Taiwan
Chun-Ta Yu (Industrial Technology Research Institute) |
Dec.11(Mon) Room B
13:00-15:00 (RC-1-6) Resource Circulation in Asia
[RC-1]@Mobile phone market status and possibility of 3Rs activities in Indonesia
Fajar Novianto
[RC-2] Eco-Design strategies for electronics supply chains based on product material declarations
Lutz Stobbe (Fraunhofer IZM,)
[RC-3] Managing environmental based regulations-from global confusion to international obligatory guidelines
Hansjoerg Griese (Fraunhofer IZM)
[RC-4] EcoDesign of E-manufacturing system in China
Zhonghua Xu(The University of Tokyo,)
[RC-5] Current status and future direction of EcoDesign in Thailand
Thumrongrut Mungcharoen (Kasetsart University)
[RC-6] Application of quality function deployment (QFD) and analytical hierarchy process (AHP) to the Eco-Design of portable personal computers
Yuh-Ming Lee (National Taipei University)
Session in Japanese
15:00-16:00 (LJ-2-4) Lifestyle/Consumption
[LJ-2] On the lifestyle appropriate for sustainable society: A simulation analysis using the demand function in linear expenditure system and the environmental input-output table
Miki Shinozaki (The Foundation for Earth Environment)
[LJ-3] Universal camp leads to expanding realization and possibilities
Sanae Uchiyama (NPO Universal Event Association)
[LJ-4] The present issues & the vision of Eco-design (Ec.D) and Universal-design (Un.D)
Tsutomu Terazawa (Takushoku University)
Session in Japanese
16:40-18:40 (RJ-1-6) Recycling Technology
[RJ-1] Recyclability of paper sludge as raw material of board
Keiichi Chikamori (Kochi Prefectural Paper Technology Center)
[[RJ-2] Material recycling of a mixture of residual plastics from waste household appliances
Yuichi Matsuo (Mitsubishi Electric Corporation)
[RJ-3] Development of electrostatic separation system for a mixture of styrene resins
Endo Yasuhiro (Mitsubishi Electric Corporation)
[RJ-4] Recycjing technology development of mixture crushed plastic in home appliance
Shinobu Ogasawara (Mitsubishi Electric Corporation)
[RJ-5] Environmentally conscious and self circulation type recycling package of an electric refrigerator
Hiroshi Matsumoto (Mitsubishi Electric Corporation)
[RJ-6] Assessing the environmental burden of printed circuit board mounted electronic parts
Yuzo HORIKOSHI (FUJITSU Laboratories)
|
Dec.12(Tue) Room B
Session in Japanese
8:50-10:10 (SJ-1-4) Recycling Society/Company Issue
[SJ-1] Verification of embodied CO2 emission intensities based on input-output tables established in 2000
Yoshiyuki Hondo (Toshiba Corp)
[SJ-2] Survey on environmentally conscious design in Japanese electrical and electronics industry
Keijiro Masui (National Institute of Advanced Industrial Science and Technology)
[SJ-3] The Environmental load reduction effect of FTTH and mobile communication services
Takashi Sawada (NTT Information Sharing Laboratory Group)
[SJ-4] Business model for resource recycling company: Present and future
Shinya Nagasawa (Waseda University)
Session in Japanese
10:10-11:30 (EJ-1-4) Design Tool for EcoDesign
[EJ-1] Introduction of DFD tool considering environmental load (Third report)
Katsumi Fujisaki (Mitsubishi Electric Corporation)
[EJ-2] Integrated computer environment for supporting product life cycle design
Yasushi Umeda (Osaka University)
[EJ-3] A standard for automating the exchange of material composition information throughout the supply chain
Seigo Ito (Toshiba Corporation)
[EJ-4] IT system approach for life-cycle Eco-design
Tomoyo Sasaki (Hitachi,Ltd)
Session in Japanese
12:20-13:40 (HJ-1`4) Material and Technology for RoHS
[HJ-1] Accelerated evaluation of corrosion gasses for conductive pastes corresponding to Southeast Asian environments
Osamu Ikeda (Sony Corporation)
[HJ-2] Reduction process of tin whisker (JMI process)
Kyu-Taek Kouichi KAMIYAMA (Japan Victor Corporation)
[HJ-3] Approach to environmental considered joint technology for infrastructure products
Tsuyoshi Yamamoto (Fujitsu Limited)
[GM-4][HJ-4] Development of flame-retardant solder-resist ink for print circuit
Katsuyoshi Ishida (Fujikura Limited)
Session in Japanese
13:40-15:00 (AJ-1-4) Consumer behavior/Value for Consumer
[AJ-1] Evaluating customer requirements for Eco-value analysis
KUBOKI Michiko (Tokyo Metropolitan University)
[AJ-2] Measurement of willingness-to-pay of Japanese and Thai consumer for an environmentally conscious automobile
Noriyuki HORIE (Tokyo University of Information Sciences)
[[AJ-3] Relevancy between durable goods and a consumer behavior model
Sayaka Ita (Waseda University)
[AJ-4] Effects of the environmental information of products on the consumer behavior
Tsai Pi-Ju (I-SHOU University)
|
Dec.11(Mon) Room C
Session in Japanese
14:20-15:40 (MJ-1-4) Design Guide and Modular Design
[MJ-1] A trend of easy disassembly methods in Japanese patents
Yuta Sonoda (National Institute for Materials Science)
[MJ-2]A product family design method considering life cycle scenario
Gaku Saito (The University of Tokyo)
[MJ-3] Application of the Eco-Design guidelines for software products
Shinji Kawamoto (Fuji Xerox Co., Ltd)
[MJ-4] Eco-Design of using MFCA(Material Flow Cost Accounting)
Kyoko Tajima (Hitachi,Ltd)
|
Dec.12(Tue) Room C
Session in Japanese
8:50-11:10 (IJ-1-8) Information Technology
[IJ-1] Promotion of resources recycling by "tele-inverse-manufacturing
Mitsutaka Matsumoto (National Institute of Advanced Industrial Science and Technology)
[IJ-2] The development of a production information management system that checks legal compliance for batch production
Takafumi SHIMIZU (Hokkaido University)
[IJ-3] The environmental impact of using ICT in industrial sector
- The effect of environmental load reduction by using SCM techniques -
Takeshi Origuchi (NTT Information Sharing Laboratory Group)
[IJ-4] The consumer needs for the home-energy-management system
Kazuhiro FUKUYO (Yamaguchi Univ.)
[IJ-5] Environmental factor of videoconference considering ripple effects and function/value differences
Kazue Takahashi (Nippon Telegraph and Telephone Corporation)
[IJ-6] Sustainable navigation depending on individualfs preference
Masayuki Tsuda (Nippon Telegraph and Telephone Corporation)
[IJ-7] Environmental impact assessment on substitution of transportation traffic by telecommunication
Masaru Takahashi (the University of Tokyo)
|
Project Session & Organizing Session
Dec.11(Mon) Room C
Project Session AE
13:00-14:20 (AE) Project Session on Automotive Engineering
(AE-1) Toyotafs technologies for Fuel Economy Improvement
Eishi Ohno(Toyota Motor Corp)
(AE-2) Introduction to the SKY project
Michinori Hachiya (Nissan Motor Co., Ltd.)
(AE-3) The approach to development and introduction of a clean diesel for a heavy-duty commercial vihecle
Isami KANAYA and Akinori MIURA(Nissan Diesel Motor Co., Ltd.)
(AE-4) Hondafs environmental technologies
Hiroshi YAMASHITA(Honda Motor Co., Ltd.)
Project Session MT
16:00-18:40 (MT) Project Session on Monotsukuri(Production Design)
(MT-1) Ubiquitous device
Masayoshi MATSUYAMA, Takashi KORENAGA(Tokyo MetropolitanUniversity)
Japanese
(MT-2) Appealing MEMS business and development MEMS device
Koji HONMA (MEMS-CORE Co. Ltd.)
Japanese
(MT-3) Nano-tweezers for ă-DNA manipulation
Momoko KUMEMURA,Naoyoshi SASAKI, Christophe YAMAHATA, (University of Tokyo)
Gen HASHIGUCHI(Kanagawa University)
Dominique COLLARD, Hiroyuki FUJITA(University of Tokyo)
Japanese
(MT-4) Total cleanize of minute processing
Koichi HARITA(Soken Industries Co. Ltd.)
Japanese
(MT-5) Environmental measurement using micro fluidic pretreatment device
Hiroyuki MASAKI , Takashi KORENAGA (Tokyo MetropolitanUniversity)
Japanese
(MT-6) A downsized Time of Flight Mass Spectrometer
Rieki SUDO(On-site Research), Takashi Korenaga(Tokyo MetropolitanUniversity)
English
(MT-7) Miniaturization of Pressure Control Interface: Synthesis and Property of Monolithic Silica in Capillary and Micro-channel
Wei Chang, Takashi KORENAGA(Tokyo MetropolitanUniversity)
Japanese
(MT-8) EcoDesign for advanced handy Mass Spectrometer
Hiroshi YANAZAWA, Shokichi MATSUNAMI(MEMS-CORE Co. Ltd.)
|
Dec.12(Tue) Room C
Session organized by JSME&JSPE
12:20-15:00 (PM) Evaluation of Product Life Cycle Session organized by JSME&JSPE
(PM-1) Basic Framework and Issues of Integrated Evaluation of Product Life Cycles
Yasushi Umeda (Osaka Univ.)
(PM-2) Methods for Value Estimation - Value Estimation Index for Environmental Consciousness and More Added Value
Yoshiki Shimomura (Tokyo Metropolitan Univ.)
(PM-3) Total performance analysis of product life cycle considering the deterioration and obsolescence of product value
Shinsuke Kondoh (AIST, Japan), Keijiro Masui (AIST, Japan), Nozomu Mishima (AIST, Japan), Mitsutaka Matsumoto (AIST, Japan)
(PM-4) Eco-efficiency for ICT - Quantification of Environmental Load and Value
Yasunari Matsuno (the Univ. of Tokyo), Kazue Takahashi (NTT Corporation), Masayuki Tsuda (NTT Corporation, Jiro Nakamura (NTT Corporation), Shiro Nishi (NTT Corporation)
(PM-5) Product and Service Development Using Factor T
Hideki Kobayashi (Toshiba)
(PM-6) Deployment of Factor X in Matsushita Electric
Narito Shibaike (Matsushita), Taeko Aoe (Matsushita), Akira Nakamura (Matsushita)
(PM-7) Introduction of Factor X and its Deployment for Sustainable Society
Katsumi Fujisaki (Mitsubishi Electric), Tetsuya Takahashi (Mitsubishi Electric), Kiyoshi Ueno(Mitsubishi Electric)
(PM-8) Approach and Effects of Eco-efficiency in Canon
Akiyoshi Ishizuka (Canon)
|
Dec.11(Mon) Room D
Project Session LD
13:00-15:40 (LD) Project Session Ecodesign to stimulate local development
(LD-1) A trial production of boat with hydrogen gas engine toward environment conscious and the prospects in the future
Satoru EZOE( National Fisheries University),Hukuta MATSUURA(Nihon Kaiyo Sangyo Co. Ltd.),
Makoto NAKAMURA( National Fisheries University),Minoru TSUDA( National Fisheries University),
Junji KAWASAKI( National Fisheries University)
(LD-2) Pre-study about co-generation and hydrogen supply by biomass gasification in Malaysia
Mitsuo KAMEYAMA(Japan Planning Organization Inc.)
(LD-3) Business inspired by environment issue
(LD-3-1) Introduction to Gifu Plastics Industry and her products
Toshiyuki OOMATSU (Gifu Plastics Industry Co. Ltd.)
(LD-3-2) gEco-Designh for Monozukuri
Takehisa KABETANI (METI(Chubu))
(LD-3-3) Environment & Recycling Business Activity at Kosaka Smelter
Nobuo YAMAZAKI( Kosaka Smelting Co.Ltd.)
(LD-3-4) Recycle to Products
Ichiro YAMBE(METI(Tohoku))
(LD-4) Discussion in summary
Hidetaka HAYASHI( University of Tokyo(Moderator))
Session Organized by JIEP
16:00-18:40 (JI) Jisso(Electronic Packaging) and Ecodesign Session Organized by JIEP
(JI-1) Introduction to Green Jisso Technology for Sustainable Evolution
Hidetaka HAYASHI (Eco-Design & Jisso Workshop/ Director JIEP)
(JI-2) One proposal of oil secession
Kanji OTSUKA (Meisei University: President JIEP)
(JI-3) Application of nano-structural self alignment effect for printed circuts
Tetsuya OSAKA (Waseda University)
(JI-4) Surface Modification of Insulation Resin for Build-up Process Using TiO2 as a Photocatalyst
Kotoku INOUE, Ichiro KOIWA and Hideo HONMA (Kanto Gakuin University)
Japanese
(JI-5) Recycle of reused Si wafers to solar cells
Asako MIYAKAWA(Osaka University), Mariko KIHARA(Osaka University(NTT DoCoMo Kansai,Inc)), Keisuke UENISHI, Takehiko SATO(Osaka University),Masakazu SATO(TAK Materials Corporation)
(JI-6) The standardized voluntary emission criteria for the emission rate and test method for PC
Seiichi Kurihara (Fujitsu Ltd), Yasuharu Satou(NEC Personal Products, Ltd.), Kazunaga Kawate ( Japan Electronics & Information Technology Industries Association)
(JI-7) Development of Dye-sensitized Solar Cells
Takayuki KITAMURA, Hiroshi MATSUI, Ken-ichi OKADA(Fujikura Ltd)
|
Dec.12(Tue) Room D
Session Organized by AIJ
8:50-10:10 (AT) Re-design of Material Flow Session Organized by AIJ
Session Organized by JSAP
10:10-15:00 (RE) Application of Renewable energy and Extreme improvement of the Energy efficiency
Session Organized by the Study Group on Energy and Environment, The Japan Society of Applied Physics JSAP
Chair : Syunji KISHIDA (NEC)
10:10`10:15 (RE-1) Opening (eng.)
Haru-Hisa Uchida(Tokai University)
10:15`11:00 (RE-2) One proposal of oil secession
Yoichi KAYA (Research Institute of Innovative Technology for the Earth (RITE))
11:00`11:30 (RE-3) Present Status and Future Prospect of Wind Energy in Japan(Invited Lecture(eng.))
Izumi USHIYAMA(Vice President, Graduate School of Engineering, Ashikaga Institute of Technology)
<lunch time>
12:20`12:50 (RE-4) Direction to sustainable society by development of high efficient and low cost fuel cell and storage battery(Invited Lecture(jap.))
Yoshiteru SATO(New Energy and Industrial Technology Development Organization)
12:50`13:20 (RE-5) New Application and Development of Solar Power Generation (Invited Lecture (jap.))
Shunji Kishimura(Kishimura Industry Co.)
13:20`13:50 (RE-6) Regional Activation and Hydrogen Utilization in City Saijo (Invited Lecture (jap.))
Manabu HAMADA(Planning and Economic Department, Saijo City)
13:50`15:00 (RE-7) Panel Discussion (Renewable energy realizes the sustainable society ?(jap.))
Coordinator: Haru-Hisa Uchida
Panelists: Izumi USHIYAMA, Yoshiteru SATO, Shunji KiSHIMURA, Manabu HAMADA, Syunji KISHIDA
|
|